Tru Pac X Vertical Concerte Mortar Kit, Durable, Carveable, Stampable Walttools

Description

Walttools
Tru Pac X
is the most economical and highest performing vertical concrete mix available. The 17lb kit is to be combined with common 80 lb bagged type S mortar commonly found at all major (and most minor) home improvement stores and concrete supply houses. This combo gives you 60% more coverage of standard bagged vertical mixes at the same, or much less cost. By allowing you to locally source the premixed mortar, you save greatly on shipping weight as well. You can do nearly anything with vertical concrete!
Tru Pac X is the strongest vertical carving mix you can get.  You can do any vertical faux finishing, furniture, counter tops, etc with this mix.  It can be applied from as thin as 4 inches, and up to 14 inches.
Click here to watch video
If need more than 15, call in for freight pricing.
Each pre-measured kit is to be used with one 60 lb bag of mortar (kit is not supposed to be used alone)
Exhibits extended set times that allow decorative impressions such as stamping, sculpting, and hand-carving
Vertical stampers can get started right after placement of the mix
Non-sagging, lightweight design can be built up to 3-5 inches with proper scratchcoat.
Bonds strongly to normal mortar scratch coat
Naturally designed to be sound for outdoors, though some modifications are recommended based on climate
80 lb kit covers approximately 18-20 sq ft at 1 inch