-40%
Foredom MP119P Motor Brushes Flex Shaft Series CC DD MM FOREDOM ORIGINAL Parts
$ 6.75
- Description
- Size Guide
Description
FOREDOM MOTOR BRUSHMP119P CARBON BRUSHES
FOR
Series CC - DD - MM 115Volt
A Pair of
FOREDOM ORIGINAL
motor brushes for:
CC, DD and MM motors (115 Volt only) - for domestic use
Brushes should be checked for wear periodically. When new they are approximately 5/8" long. Replace them when they have worn to 1/4".
*** Be sure to replace both motor brushes even if one of them is less worn than the other.
NOTE: Earlier models of Series SR motors (built prior to November 2005) are 1/8HP and use different brushes, part number: MP2019P.
JETS Product # 0616-0119
Made In USA
by Foredom
®
PART# MP0119P
Shipping: Via USPS MAIL
®
Please visit
JETSTOOLS
our ebay Store for many more Foredom Tools and Accessories along with many more Tools and Supplies for Jewelry Making, Woodworking and Wood Carving, Hobby and Craft and a selection of other
J
ewelers
E
quipment
T
ools
S
upplies.
JETSINC.
Learn More About Motor Brushes:
All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is embedded in the brush, terminated in a U or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.
E2 517 CKP M