Foredom Flexshaft Kit SR Motor with SCT Speed Control and #30 Handpiece Complete

Description

FOREDOM FLEXSHAFT SET
SR FLEX SHAFT + SCT SPEED CONTROL + #30 HANDPIECE
-
This is a Foredom set that contains the M.SR Hang-Up Motor along with C.SCT-1 Speed Control 115 Volt and 30 Handpiece.
DETAILS:
-
Foredom's 1/6 HP
, universal, flexible shaft machine
runs in forward and reverse
rotation at
speeds up to 18,000 RPM
. The M.SR combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 20+ interchangeable, quick disconnect handpieces.
Motor Details:
The 1/6 hp, ball bearing Series SR has 33% more power than older 1/8 hp motors, and 66% more than the original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads.
Advantages of Running in Reverse:
Left handed users have more control of the cutting tool
Reverse helps to keep dust and other debris flying away from right handed users
Alternating motor direction helps to extend the life of certain abrasives
Reverse helps with accomplishing symmetrical grinding and carving techniques
Reverse makes it easier to back out stuck drill bits
Alternating motor direction makes it easier and faster to polish metals
-
Foredom Speed Control
, the C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. -- 7″ long, 5″ wide, 2-1/2″ high.
-  H.30
Handpiece, General Purpose,
the H.30
®
general purpose handpiece has pre-lubricated ball bearings that require no maintenance.  This is the #30 Handpiece which works with the standard round key tip shaft.
The #30 Handpiece is one of the most popular and versatile chuck type handpiece, widely used in numerous applications.  This is the Original from Foredom
®
.
It features a general 3-Jaw #0 chuck that takes any size shank accessory or drill bit up to 5/32” / 4mm.
-- 5-3/16" Length,1"
Diameter
-
HPCK-0
Chuck Key:
Molded plastic handle for changing rotary tools and accessories.
NOTE: A Handpiece is REQUIRED to operate your Flex Shaft Machine if you do not have one, see the various ones in our store. You may contact us with any questions.
JETS Product # 0615-192030
Made by FOREDOM
®
Two-Year Warranty on 1/6HP Series SR Motor
Sale is for SR Motor with SCT Control and #30 Handpiece - Item is Brand New
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see various Foredom Products including Handpieces, Motor Hangers for Flexshaft Motors and many more
J
ewelers
E
quipment
T
ools
&
S
upplies.
JETS Inc.
UPS 11Ls 819 CKSP M